It works for me. The only difference is that I am my own wireless
provider.
Benjie Ko wrote:
> Hello,
>
> I have a flat OSPF area on my network. One of our
> remote sites will be connected through another
> wireless provider.
>
> main siteA<-> wireless provider<-->Bremote site
> network
>
> The wireless link is not a direct link from main site
> and remote site but would pass through a routed
> network (the wireless provider's network).
> Our wireless provider will provide ip addresses on
> both enpoints (A &B) of our network
> I would want to run OSPF between the main site and the
> remote site. The only solution I can think of right
> now is to put up a GRE tunneling between the two
> sites.
> What are the drawbacks in doing this? Are there any
> other alternatives?
>
> Thanks.
>
> Benjie
>
> __________________________________________________
> Do You Yahoo!?
> Check out Yahoo! Shopping and Yahoo! Auctions for all of
> your unique holiday gifts! Buy at http://shopping.yahoo.com
> or bid at http://auctions.yahoo.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:25 EDT