Yes,
In order to have trunking support you should be running
"Enterprise Edition Software", (use 'sh ver' to verify),
Not all models are upgradeable, if this is a rather new
switch and has 8M DRAM, it can be most likely upgraded.
> -----Original Message-----
> From: Desmarais, Jonathan [mailto:JDesmarais@colt-telecom.com]
> Sent: Thursday, December 13, 2001 15:07
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] 2924M XL DC
>
>
> I am trying to find clarity on the trunk functionality of the
> Cat 2924M
> switch.
> The documentation
> (http://www.cisco.com/warp/public/cc/pd/si/casi/ca2900xl/prodl
> it/2924m_ds.ht
> m)
> ambiguously states that "All interfaces" support ISL/802.1q
> trunks, however
> the statement is in a bullet point specifically about the
> modular high-speed
> slots.
>
> Does anyone use the 2924M XL with the base unit 10/100
> interfaces (F0/0-23)
> configured
> in trunk mode?
>
> Regards
> Jon
>
>
>
> Jonathan Desmarais
> UK Data Engineering
> COLT Telecommunications
>
>
> **********************************************************************
> COLT Telecommunications
> Registered in England No. 2452736
> Registered Office: Bishopsgate Court, 4 Norton Folgate, London E1 6DQ
> Tel. 020 7390 3900
>
> This message is subject to and does not create or vary any contractual
> relationship between COLT Telecommunications, its subsidiaries or
> affiliates ("COLT") and you. Internet communications are not secure
> and therefore COLT does not accept legal responsibility for the
> contents of this message. Any view or opinions expressed are those of
> the author. The message is intended for the addressee only and its
> contents and any attached files are strictly confidential. If you have
> received it in error, please telephone the number above. Thank you.
>
>
> **************************************************************
> **********
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:25 EDT