Re: [nsp] WCCP & the 6500

From: fingers (fingers@fingers.co.za)
Date: Mon Dec 17 2001 - 09:09:56 EST

Next message: Jim Brunetti: "RE: [nsp] Frame Relay question-CIR on a Cisco 2610"
Previous message: Rich Sena: "Re: [nsp] WCCP & the 6500"
In reply to: Rich Sena: "Re: [nsp] WCCP & the 6500"
Next in thread: Lincoln Dale: "Re: [nsp] WCCP & the 6500"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

> > squid (publically) only supports WCCPv2 - so you'll need "ip wccp version
> > 1" as a global config command if this is the case.
>
> That's a typo right? s/b 'squid (publically) only supports WCCPv1' or am I
> readying that wrong...

you are correct. I think it's a typo.

Regards

--Rob

Next message: Jim Brunetti: "RE: [nsp] Frame Relay question-CIR on a Cisco 2610"
Previous message: Rich Sena: "Re: [nsp] WCCP & the 6500"
In reply to: Rich Sena: "Re: [nsp] WCCP & the 6500"
Next in thread: Lincoln Dale: "Re: [nsp] WCCP & the 6500"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:26 EDT