[nsp] Channelized E1 (balanced) PA 2 ports .....software probz...

• Next message: Greene, Patrick: "RE: Service Provider and the 7600?"
• Previous message: Lincoln Dale: "Re: [nsp] WCCP & the 6500"
• Next in thread: KF: "RE: [nsp] Channelized E1 (balanced) PA 2 ports .....software probz..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Heyla,

since last months.... I'm encountering an numerous problems with Channelized traffic over Channelized E1 (balanced) PA's (2ports) on
the 7206's.

All subinterfaces running CEF/FLOW... but this problem occuring also with route cache disabled:

After the "long" time some of the subinterfaces starting to have output drops ... a LOT OF.... I'm wiggin' outta.. , found that
physical layer have no errors... and the workaround is to reload only ... no shut/no shut controller either sub intf. help... Some
"circuits" gone berserk .. all this happening "often" let's say once per week or two.. but..(t).....

Was there any RMA concerning this PA's? or anyone experienced simmilar probs?

running from 12.0.18-19S1 on different boxes... all doin' the same.. Should I wax a TELCO?

greetz

Alex

• Next message: Greene, Patrick: "RE: Service Provider and the 7600?"
• Previous message: Lincoln Dale: "Re: [nsp] WCCP & the 6500"
• Next in thread: KF: "RE: [nsp] Channelized E1 (balanced) PA 2 ports .....software probz..."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:26 EDT