Re: [nsp] how to monitor of SNR of ubr7246VXR with MRTG

From: Matt Ciszkowski (mciszkow@cisco.com)
Date: Wed Dec 19 2001 - 12:47:42 EST

Next message: Tejal Shah: "[nsp] How to take backup on tftp server"
Previous message: Gyorfy, Shawn: "RE: [nsp] Detecting configuration changes"
In reply to: Tejal Shah: "[nsp] how to monitor of SNR of ubr7246VXR with MRTG"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi Tejal,

try .1.3.6.1.2.1.10.127.1.1.4.1.5 (docsIfSigQSignalNoise)

from

ftp://ftp.cisco.com/pub/mibs/v2/DOCS-IF-MIB.my

Tejal Shah wrote:
>
> hello all,
>
> How can i measure the SNR of my CMTS ubr7246VXR with
> MRTG,or in HP-OV or in other monitoring utility.
>
> What OID should i use in MRTG?
>
>
>
> thanks in advance
> Tejal Shah
>
> Go To http://www.iqara.net

Next message: Tejal Shah: "[nsp] How to take backup on tftp server"
Previous message: Gyorfy, Shawn: "RE: [nsp] Detecting configuration changes"
In reply to: Tejal Shah: "[nsp] how to monitor of SNR of ubr7246VXR with MRTG"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:26 EDT