Thus spake "Benjie Ko" <gerwalk1@yahoo.com>
> But switches should be in transparent mode to
> implement vlans....Is it right to say that I will have
> to manually add the primary and secondary VLANS on all
> my 3548s and allow the vlans on the trunk interfaces?
Why do you think the switches need to be in VTP Transparent mode? The whole
point of VTP is to obviate the need to configure the same VLAN settings on
every switch.
S
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:27 EDT