Jeronimo Diez de Sollano Velazco Aceves <jdiez@bestel.com.mx> writes:
> i´m trying to find out what does cisco mean when they say "high CPU
> utilization" and "High memory utilization" in terms of percentage.
> If anyone has documentation with numbers about it i´ll apreciate a copy.
> if anyone can helpme to find out what amount of memory and processor should
> i be using in a Cisco 7507 with TCP/IP and BGP Full routing, it would be
> very nice.
> Thanks
Of course this depends on how much traffic you are pushing through the
router, what interfaces are installed, whether your upstreams are
dampening route churn and to what extent, how many views, etc. In
short there are plenty of factors that enter into this, too many to be
too general.
As a very rough rule of thumb, if your one minute CPU average is less
than 50% and you have more than 40 megs of free memory (and it's not
fragmented), it is very unlikely that you are experiencing memory or
cpu shortage.
---Rob
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:28 EDT