I friend of mine had a switch with the exact same behavior about 4
months ago. After an hour or so with TAC they came to the conclusion it was
a faulty console port. An RMA solved the problem.
Ramin
At 11:25 PM 1/8/2002 -0800, you wrote:
>I have a problem with a 2924 switch, the flash was wiped clean with the
>exception of the boot loader (oops). My problem is when I am trying use
>xmodem to upload the new IOS it errors out without transferring data.
>I'm wondering if anyone can help me with what I'm missing, I have used
>SecureCRT, Hyperterm and Terra Term pro for the upload, set flow control
>to none and RTS/CTS both of which were suggested by various resources on
>the web. I have tried everything else I could think of, with no luck
>just errors. Any help would be greatly appreciated.
>
>The command I am using on the switch to prep it for the xmodem transfer
>is
>
>switch: copy xmodem:c2900XL-c3h2s-mz-120.5-XW.bin
>flash:c2900XL-c3h2s-mz-120.5-XW.bin
>
>The other question that relates is with the copy command from the
>switch: prompt gives you a -b flag for buffers, any idea what that
>should be set to? Or should I just default it?
>
>thanks
>ryan
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:28 EDT