I am prolly missing something just dumb but my brain is in a cloud today...
I have a cisco 3640 and I am attempting to do "routing on a stick"
between vlans on a switch.
Here is an abbreviated configuration:
interface FastEthernet1/0
description {46}
ip address 10.0.1.1 255.255.255.0
no ip directed-broadcast
speed 100
full-duplex
no cdp enable
interface FastEthernet2/0
no ip address
no ip directed-broadcast
speed 100
full-duplex
no cdp enable
interface FastEthernet2/0.60
encapsulation dot1Q 60
ip address 10.0.2.1 255.255.255.0
no ip directed-broadcast
no cdp enable
I can ping all hosts on vlan 60 and subnet ip 10.0.2.0/24 from the router
I can ping all hosts on all 10.0.1.0/24 from the router.
I cannot ping from 10.0.2.0/24 to 10.0.1.0/24. (through the router)
or vice versa.
All the above ips are in the routers arp table (sho ip arp | inc 10.0.1.)
IOS version: IOS (tm) 3600 Software (C3640-D-M), Version 12.0(7)XK1,
EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
tia
ryan
ps.. thanks to all that gave me a clue as to how to do the sho vlan
thing for stats. I have a little script now that grabs info for me
for MRTG.
--
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:28 EDT