On Fri, Oct 29, 1999 at 02:09:43PM -0500, Edward Henigin wrote:
>
> Anyone know anything about the 12.0(6)S memory leaks? We
> have a 12.0(6)S 7513 with 42M being held by process *Dead*. A
> quick search on CCO turns up CSCdp17433 and CSCdp22970, but the
> notes (that I can see anyway) both say
>
> "No Release Note information is available yet. .. [ blah blah blah]"
>
> The TAC guy says "Boy I've never seen a case where Dead is
> holding memory like this..."
>
> I'd like to up or downgrade.. I guess I could go back to
> the 12.0T train, but I kinda wanted to avoid that, and I like my
> ssh and turbo ACL's..
I don't know how your 7500 is, but here we have some 7200's running
12.0(5)S (because we need MSDP), they are stub routers running as BGP
route reflectors and PIM RP's
xxxx#sh ver
[cut]
IOS (tm) 7200 Software (C7200-K3P-M), Version 12.0(5)S, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
[cut]
arcnxb2 uptime is 14 weeks, 3 days, 6 hours, 5 minutes
[cut]
cisco 7206VXR (NPE300) processor with 122880K/40960K bytes of memory.
xxxx#sh proc mem
Total: 109122592, Used: 66604220, Free: 42518372
PID TTY Allocated Freed Holding Getbufs Retbufs Process
0 0 455816 65836 3293704 0 0 *Init*
0 0 1012 17621220 1012 0 0 *Sched*
0 0 96294628 85911932 2343468 457196 19520 *Dead*
Not too bad ...
/Jesper
-- Jesper Skriver (JS4261-RIPE), Network manager Tele Danmark DataNet, IP section (AS3292)One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:07 EDT