Re: [nsp] ip nat inside -> inside static

From: Gert Doering (gert@greenie.muc.de)
Date: Fri Jan 18 2002 - 11:43:42 EST

Next message: Deepak Jain: "[nsp] T3 clear interface?"
Previous message: Jared Mauch: "Re: [nsp] Cisco 7500 Series With PA-A3-OC3MM - Simplex Operation"
In reply to: kevin graham: "[nsp] ip nat inside -> inside static"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

On Tue, Jan 15, 2002 at 08:16:01PM -0800, kevin graham wrote:
> I'm trying to find a way to permit an inside host to connect to an inside
> static.. ie:

It might be possible do do that by bouncing the traffic to a loopback
which is "ip nat outside".

(Similar to get IPSEC working together with static NAT, only that the
loopback does NOT have "ip nat *side" set there)

gert

-- 
Gert Doering
Mobile communications ... right now writing from *train AMS -> MUC*

Next message: Deepak Jain: "[nsp] T3 clear interface?"
Previous message: Jared Mauch: "Re: [nsp] Cisco 7500 Series With PA-A3-OC3MM - Simplex Operation"
In reply to: kevin graham: "[nsp] ip nat inside -> inside static"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT