[nsp] Two OSPF precess for the same VRF

• Next message: Luan Nguyen: "[nsp] How to put comment on Cisco router?"
• Previous message: Nicholas Bastin: "[nsp] as-path list matching with confederations"
• Next in thread: Zaheer Aziz: "Re: [nsp] Two OSPF precess for the same VRF"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,
    If there are two OSPF processes configured for the same VRF name, is

it necessary to put a "redistribute ospf" statement in each other's
instance ?

eg. 2 CEs belonging to the same VPN connected to on PE.

ip vrf test
    rd 100:10
    route-target....

interface ethernet 0/1
    ip vrf forwarding test
    ip address 10.10.0.1 255.255.255.252

 interface ethernet 0/2
    ip vrf forwarding test
    ip address 172.10.0.1 255.255.255.252

router ospf 10 vrf test
    redistribute bgp metric 20
    network 10.10.0.0 255.255.0.0 area 0

router ospf 100 vrf test
    redistribute bgp metric 20
    network 172.10.0.0 255.255.0.0 area 0

Because these two OSPF process are populating the routing instance
"test", do i still need to redistribute ospf in to each other.

-thanks in advance

 Manpreet

• Next message: Luan Nguyen: "[nsp] How to put comment on Cisco router?"
• Previous message: Nicholas Bastin: "[nsp] as-path list matching with confederations"
• Next in thread: Zaheer Aziz: "Re: [nsp] Two OSPF precess for the same VRF"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT