[nsp] Ciscoworks2000 and 7200VXR's

• Next message: Dhiman Barman: "[nsp] cisco configuration"
• Previous message: C. Jon Larsen: "Re: [nsp] How to put comment on Cisco router?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

We have about 30 7206VXR's in our access network. Most run 12.0(16)S or higher, but there are some with 12.0(15)S1 or less. Regular IP strain.

These latter routers are the troublesome one's. The config's between the different IOS's are the same (bar the obvious), but the 12.0(15)S routers will not add into the RME database. The availability tests show all area's accessable the same for routers that work and those that don't. i.e. SNMPR,SNMPW, VTY(Telnet), and TFTP.

Any thoughts?

TIA
Jon..

• Next message: Dhiman Barman: "[nsp] cisco configuration"
• Previous message: C. Jon Larsen: "Re: [nsp] How to put comment on Cisco router?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT