[nsp] 10Mb eth question

From: Birsen Ozturk (birsen.ozturk@is.net.tr)
Date: Thu Jan 24 2002 - 05:03:47 EST

Hello all
I have a Cisco2500 ethernet connected to a switch. The 2500 is supposed to
route back the traffic comming from Eth0 back to Eth0 if the destination of
the traffic is another router connected to another port of the same switch.
Will my 2500 do that(the Eth0 is 10Mb and half-duplex so I cannot make it
trunk). i.e. can I make something similar to "router-on-a-stick" topology
without VLANs on 10Mb half-duplex port?

Thanks in advanace

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:29 EDT