now I see.. that I missunderstood your question.. thought so, You mentioned an security audit of network done by Cisco pals..
hmm it's kindda offtopic but know anyone some details about that?
greetz
Alex
> -----Original Message-----
> From: Ryan O'Connell [mailto:ryan@complicity.co.uk]
> Sent: Monday, January 28, 2002 9:45 PM
> To: Alejandro Esquivel Rodríguez
> Cc: cisco-nsp@puck.nether.net
> Subject: Re: [nsp] Cisco Network Audit
>
>
> On Mon, Jan 28, 2002 at 11:35:42AM -0600, Alejandro Esquivel
> Rodríguez wrote:
> > I need information or any documentation for
> > the basis that Cisco Network Audit ( "show commands, cisco
> > information, etc")
>
> If you're after information to do an audit of your network
> (Your mail is a
> little unclear) then the commands you want are:
>
> Most IOS routers - show diag
> CatOS/XDI switches - show mod
> Fixed-config routers and switches - show ver
>
> This assumes that you have access to all devices and know
> where they are. If
> not, show cdp neigh may be useful.
>
> Some devices can't tell you their serial number - mostly
> older Cat2900s,
> Local Directors etc.
>
> --
> Ryan O'Connell - CCIE #8174
> <ryan@complicity.co.uk> - http://www.complicity.co.uk
>
>
> I'm not losing my mind, no I'm not changing my lines,
> I'm just learning new things with the passage of time
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:30 EDT