Actually, full NAT is supported on all plus images in 11.2 and 11.3, as well
as the Firewall Feature sets.
Scott
-----Original Message-----
From: Jesper Skriver [mailto:jesper@skriver.dk]
Sent: Thursday, November 04, 1999 3:23 PM
To: Peter Salvage
Cc: Cisco Mailing List
Subject: Re: NAT on Cisco1600 series
On Thu, Nov 04, 1999 at 10:07:42PM +0200, Peter Salvage wrote:
> Hi all
>
> Is it possible? I can't seem to find any doc's confirming or denying it.
Short: YES
Longer: You need a image that supports it, in 11.2 and 11.3 you probably
need the enterprise image, and in 12.0 ip only, basic nat is supported,
and more extended nat is supported in the ip plus images.
/Jesper
-- Jesper Skriver (JS4261-RIPE), Network manager Tele Danmark DataNet, IP section (AS3292)One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:07 EDT