Re: NAT on Cisco1600 series

From: Basil V. Dolmatov (dol@east.ru)
Date: Thu Nov 04 1999 - 16:12:19 EST


On Thu, 4 Nov 1999, Peter Salvage wrote:

> Hi all
>
> Is it possible? I can't seem to find any doc's confirming or denying it.
Yes... If you use 11.2 you need IP Plus feature set, in 12.0 it is in IP
only. If you have old 16xx box, you may need to upgrade flash in order
to put necessary image in it.

But do not expect too much from feeble processor of 16xx
series.
>
> TIA
> /wiZZ
>

--------------------------------------
Basil (Vasily) Dolmatov CCNP-Security, CCDA
East Connection ISP, Moscow, Russia. (http://www.east.ru)



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:07 EDT