At 10:57 AM 2/7/02 +0200, Ignas Bagdonas wrote:,
>Yes, VIP4 indeed has no support for PA-2FEISL-TX, I have stepped on this
>in a bad way half a year ago.
looks like I can't remove the VIP2-50 (with PA-2FEISL-TX) until I get a new
PA-2FE-TX for the VIP4-80. The VIP4 must learn to live with the VIP2 for a
while longer, can't they?
one more thing, found this document saying I can't use my PA-2FE-TX on my
VIP2-50 without first
upgrading its hardware version:
http://www.cisco.com/warp/public/770/fn13098.shtml
IDS-7507-1LTP3#sh diag
Slot 1:
Physical slot 1, ~physical slot 0xE, logical slot 1, CBus 0
Microcode Status 0x4
Master Enable, LED, WCS Loaded
Board is analyzed
Pending I/O Status: None
EEPROM format version 1
VIP2 R5K controller, HW rev 2.02, board revision A0
Serial number: 12314241 Part number: 73-2167-04
Test history: 0x0E RMA number: 00-11-82
Flags: cisco 7000 board; 7500 compatible
thanks!
./tito
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:31 EDT