Re: pptp into a natted network?

• Next message: Steve Birnbaum: "[nsp] vrf on a native-mode Cat6k"
• Previous message: Scott.Keoseyan@BroadWing.com: "[nsp] VRF with DHCP on PE"
• In reply to: Chris Davis: "RE: pptp into a natted network?"
• Next in thread: Chris Davis: "RE: pptp into a natted network?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

I think that will work... but what interface to i apply this to and in what
direction?

Thanks,

Jim Jones, Jr.
Partner
OcuSafe, LLC
www.ocusafe.com
Attractive, Reliable, Affordable Protection.

----- Original Message -----
From: "Chris Davis" <chris.davis@computerjobs.com>
To: "'Jim Jones, Jr.'" <jimjones@oct.net>; <cisco-nsp@puck.nether.net>
Sent: Tuesday, February 12, 2002 8:54 AM
Subject: RE: pptp into a natted network?

: Try typing GRE instead of TCP or UDP in your NAT statements. GRE is its
own
: protocol.
:
: If NAT can't be configured to handle GRE specifically, you should be able
to
: configure NAT to staticly translate the IP, and then access-list the
public
: IP to permit only GRE & TCP 1723.
:
: access-list 111 permit gre any host {destination-host-public-ip}
: access-list 111 premit tcp any host {destination-host-public-ip} eq 1723
: access-list 111 deny ip any host {destination-host-public-ip}
:

• Next message: Steve Birnbaum: "[nsp] vrf on a native-mode Cat6k"
• Previous message: Scott.Keoseyan@BroadWing.com: "[nsp] VRF with DHCP on PE"
• In reply to: Chris Davis: "RE: pptp into a natted network?"
• Next in thread: Chris Davis: "RE: pptp into a natted network?"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:33 EDT