[nsp] Reg NAT configuration

From: vinodab@sancharnet.in
Date: Thu Feb 21 2002 - 06:19:06 EST

Next message: JosepLlena: "PIX question"
Previous message: Atif Munir: "[nsp] unsubscribe"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,
I am tring to use a nat for one (single) public ethernet address to be
NATed over a pvt address serial link to a pvt address LAN segment of 4
nodes.

-----| R1|-----------------------------|R2|-----
E0 WAN (serial-0) E0
Public ip Pvt /30 addr Pvt /29 addr
Address

I have used NAT function only at R1 with overload facility but it does
not appear to work.
Any leads as to how to configure the same.
Regards,
Vinod

Next message: JosepLlena: "PIX question"
Previous message: Atif Munir: "[nsp] unsubscribe"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:33 EDT