Re: [nsp] Cisco DS3 Questions..

From: Niels Bakker (niels=cisco-nsp@bakker.net)
Date: Fri Feb 22 2002 - 12:44:44 EST


* sthaug@nethelp.no (sthaug@nethelp.no) [Fri 22 Feb 2002, 18:37 CET]:
>>> What would sub-interfaces be good for on a point-to-point line?
>> To differentiate between different VRFs for packets received from the
>> CE at the PE in an MPLS-VPN setup, for example.
> Note that the same differentiation can also be done with ATM-DXI
> encapsulation (nobody seems to know this :-).

Doesn't one need ATM PA's for that?

(ObNanog: if not, how do I configure that on my routers? At least one
 inquiring - well, perverted - mind would like to know. :)

Regards,

        -- Niels.



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:34 EDT