> > Note that the same differentiation can also be done with ATM-DXI
> > encapsulation (nobody seems to know this :-).
>
> Doesn't one need ATM PA's for that?
No, you don't. ATM DXI encapsulation is meant to be used to talk with
an external ATM DSU. In practice it also works fine between two serial
interfaces on different Cisco routers. Example configuration included
below. (The routers in question happened to be a 7500 and a 2600, but
that is not really relevant...)
Steinar Haug, Nethelp consulting, sthaug@nethelp.no
----------------------------------------------------------------------
Router 1:
interface Serial0/1/0
no ip address
encapsulation atm-dxi
no keepalive
!
interface Serial0/1/0.1 multipoint
ip address 192.168.1.1 255.255.255.0
dxi pvc 0 10 mux
dxi map ip 192.168.1.2 0 10
!
interface Serial0/1/0.2 multipoint
ip address 192.168.2.1 255.255.255.0
dxi pvc 0 11 mux
dxi map ip 192.168.2.2 0 11
Router 2:
interface Serial0/0
no ip address
encapsulation atm-dxi
no keepalive
!
interface Serial0/0.1 multipoint
ip address 192.168.1.2 255.255.255.0
dxi pvc 0 10 mux
dxi map ip 192.168.1.1 0 10
!
interface Serial0/0.2 multipoint
ip address 192.168.2.2 255.255.255.0
dxi pvc 0 11 mux
dxi map ip 192.168.2.1 0 11
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:34 EDT