> Has anyone tried enabling SSH on a Cat6k switch with
> Supervisor 2 module? I am using release 7.1(2) with
> SSH support, and the switch's vty and console
I'm running with 6.3(4) and have had no problems with ssh under CatOS.
If you need to log into the msfc2, you might stumble across a bug that I
just opened with cisco. If you try to log into a native-mode cat6k or
msfc2 on a hybrid mode switch using ssh.com's Un*x or Windows client,
you'll get rejected with an authentication failure even if the password
is valid.
regards,
Steve
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:34 EDT