Based on your ACL, the aggregate should be limited to 128K.
-----Original Message-----
From: jp@pour.midcoast.com [mailto:jp@pour.midcoast.com]
Sent: Tuesday, February 12, 2002 3:41 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] traffic limiting ports
Hi, I am using a 3640 currently and have a general question about traffic
shaping. I am desiring to shape a tcp port for managing traffic abuse.
Will this below shape all port 1214 traffic exiting this interface to 128k
aggregate, or 128k per stream or per customers's IP number? I have a
suspicion it is shaping each stream to 128k, which is fine. The univercd
instructions are sort of vague and I wish to understand this fully.
In the interface configuration:
traffic-shape group 111 128000 7936 7936 1000
In the router configuration:
access-list 111 permit tcp any eq 1214 any
TIA,
Jason Philbrook
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:34 EDT