This is because the packets are L3 switched in the hardware by the PFC.
Due to the CEF based architecture of the SUP2 / MSFC2, the MSFC2 processes
routing updates, creates FIB and ADj tables. These tables then get
downloaded to the PFC hardware so that it can do local CEF lookups. Sup2
also maintains the Netflow table to provide flow statistics.
Please refer to this document on configuring NDE to monitor L3 switched
traffic:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_6_3/confg_gd/nde.htm
Nash
At 07:24 AM 3/1/2002 -0800, matthew zeier wrote:
>I'm trying to run cricket against the Vlan interfaces on a 6905 "router" and
>have noticed that IfOutOctets and IfInOctets barely incremenet, if at all.
>They do, however, if I query the switch but often customers are spread
>across several switches/switch ports and I wanted any easy way to grab
>inter-Vlan bandwidth.
>
>Running 12.1(8a)E2 and 6.3(3) .
>
>Any ideas?
>
>--
>matthew zeier - "In mathematics you don't understand things. You just
>get used to them." - Johann von Neumann
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:35 EDT