as long as you have /32 there should be no problem, also be advised
it's better if you've the same router-id for LDP & OSPF process.
Carlos
-----Original Message-----
From: Gopala Naganaboyina [mailto:gnaganab@yahoo.com]
Sent: Friday, March 08, 2002 4:39 PM
To: Wu Dong; mpls-ops@mplsrc.com
Cc: cisco-nsp@puck.nether.net
Subject: Re: Problem about mpls TE router-id
Hi Wu, you can use router-id loopback 1. But I doubt
if Osr7609 supports MPlsTE.
rgds,
gopal
--- Wu Dong <wudong7212@sina.com> wrote:
> Hi All,
> I want to configure MPLS TE in Cisco OSR7609, Can I
> use the interface loopback 1 as the mpls traffic-eng
> router-id intead of loopback 0 ?
>
> Thanks
> Wu Dong
>
> -------
> The MPLS-OPS Mailing List
> Subscribe/Unsubscribe:
> http://www.mplsrc.com/mplsops.shtml
> Archive:
http://www.mplsrc.com/mpls-ops_archive.shtml
__________________________________________________
Do You Yahoo!?
Try FREE Yahoo! Mail - the world's greatest free email!
http://mail.yahoo.com/
-------
The MPLS-OPS Mailing List
Subscribe/Unsubscribe: http://www.mplsrc.com/mplsops.shtml
Archive: http://www.mplsrc.com/mpls-ops_archive.shtml
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:35 EDT