hmm it's not public... :-.
a.
> -----Original Message-----
> From: Alessandro Chiolo [mailto:alex@sauro.org]
> Sent: Monday, March 11, 2002 10:47 AM
> To: kf@reign.sk; cisco-nsp@puck.nether.net
> Subject: Re: [nsp] Channelized E1 (balanced) PA 2 ports .....software
> probz...
>
>
> "Sorry -- The defect you have requested CSCdt4889 cannot be displayed.
> This may be due to one or more of the following:
>
> The defect number does not exist.
> The defect does not have a customer-visible description available yet.
> The defect has been marked Cisco Confidential."
>
> cheers,
> Alex
>
> ----- Original Message -----
> From: "KF" <kf@reign.sk>
> To: <cisco-nsp@puck.nether.net>
> Sent: Monday, March 11, 2002 10:28 AM
> Subject: RE: [nsp] Channelized E1 (balanced) PA 2 ports .....software
> probz...
>
>
> > everyone hitting this bug..
> >
> > CSCdt4889
> >
> > a.
> >
> >
> > >
> > >
> > > Heyla,
> > >
> > > since last months.... I'm encountering an numerous problems
> > > with Channelized traffic over Channelized E1 (balanced) PA's
> > > (2ports) on
> > > the 7206's.
> > >
> > > All subinterfaces running CEF/FLOW... but this problem
> > > occuring also with route cache disabled:
> > >
> > > After the "long" time some of the subinterfaces starting to
> > > have output drops ... a LOT OF.... I'm wiggin' outta.. ,
> found that
> > > physical layer have no errors... and the workaround is to
> > > reload only ... no shut/no shut controller either sub intf.
> > > help... Some
> > > "circuits" gone berserk .. all this happening "often" let's
> > > say once per week or two.. but..(t).....
> > >
> > > Was there any RMA concerning this PA's? or anyone
> > > experienced simmilar probs?
> > >
> > > running from 12.0.18-19S1 on different boxes... all doin' the
> > > same.. Should I wax a TELCO?
> > >
> > > greetz
> > >
> > > Alex
> > >
> > >
> >
> >
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:35 EDT