On Thu, 14 Mar 2002, Iva Cabric wrote:
> On Tue, Mar 12, 2002 at 04:34:04PM -0500, Jason Mealins wrote:
> > I have a 2651 with dual FE, I have been scouring around the
> > cisco site looking for a network module with more than
> > one Ethernet Port, it doesn't have to be Fast Ethernet,
> > it can be just 10mbps. Does such a thing exist? Any help
> > would be greatly appreciated. I know some modules from the
> > 3600 series works but I really need 4 ethernet ports.
>
> If for some reason .q1 can't be used (it requires VLAN capable switch),
> you can try with NM-2W and two WIC-1ENET (actualy 2600 can have up
> to 6 Ethernet ports; 2x Fe fixed, 2x WIC-1ENET in WIC slots, and
> 2x WIC-1ENET in NM-2W).
These aren't supported in the 2600 series. Your best bet would be
either an NM-4E or an NM-2FE2W (I know the NM-2E2W isn't supported
in the 2600 series, either).
Spencer
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:37 EDT