RE: [nsp] Available BW

From: Ryan O'Connell (ryan-nsp@complicity.co.uk)
Date: Fri Mar 29 2002 - 02:48:57 EST

Next message: Tejal Shah: "[nsp] Configuring TACACS+"
Previous message: Rakesh: "[nsp] Available BW"
In reply to: Rakesh: "[nsp] Available BW"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

On 29-Mar-2002 Rakesh wrote:
> We have terminated few links on the contoller card of the 3660 series router.
> Now what we have observed is that there is a certain parameter called
> "available bandwidth" . For a 64K link , the available BW in the "Sh int" cmd
> is only 48k. Could anyone tell me what it is and how is it measured.

This number is used to determine link costs for various routing protocols.
It's not calculated automatically - you need to set it with the "bandwidth"
command. There's not much point in setting it unless youre running OSPF, EIGRP,
IGRP or ISIS.

-- 
Ryan O'Connell - CCIE #8147
<ryan@complicity.co.uk>
http://www.complicity.co.uk

Next message: Tejal Shah: "[nsp] Configuring TACACS+"
Previous message: Rakesh: "[nsp] Available BW"
In reply to: Rakesh: "[nsp] Available BW"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:39 EDT