RE: [nsp] 1600 configuration for ISDN link to as5300

From: Dave (dave@hawk-systems.com)
Date: Fri Apr 12 2002 - 11:14:26 EDT


correction, 1603/1604

>-----Original Message-----
>From: Dave [mailto:dave@hawk-systems.com]
>Sent: Friday, April 12, 2002 10:15 AM
>To: cisco-nsp@puck.nether.net
>Subject: [nsp] 1600 configuration for ISDN link to as5300
>
>
>may be stupid question,
>
>Am hooking up a customer for 128k(dual channel) isdn service. Looking to place
>a 1600 series router at their site for the termination point. Would like to
>avoid external csu/dsu
>
>what is the difference between the 1602 and 1603 in this regards if
>the customer
>will be dialing up to connect during business hours only? (little
>different then
>dropping a 2600 with 1CT1)
>
>Thanks for comments or RTFM pointers.
>
>Dave
>
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:40 EDT