RE: [nsp] blocking ipx traffic across the network!

From: Ryan O'Connell (ryan-nsp@complicity.co.uk)
Date: Mon Apr 15 2002 - 15:18:43 EDT

Next message: PJ: "[nsp] Advertising LSP into IGP?"
Previous message: Gert Doering: "Re: [nsp] CDP query"
In reply to: Mehta, Phoram: "[nsp] blocking ipx traffic across the network!"
Next in thread: Arturo Lev Servin Niembro: "Re: [nsp] blocking ipx traffic across the network!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

On 15-Apr-2002 Mehta, Phoram wrote:
> I have two networks(lans) connected through a 2501 viz., 10.10.1.0/24 and
> 10.10.2.0/24. on 10.10.1.0/24 i have a novell server. i want that all
> machines on 10.10.2.0/24 should not be able to talk to that server.
> i have an ip access-list which block any type of tcp.udp. and ip traffic
> across the network but how do i block ipx traffic. i did create an
> access-list and applied it on the interface but i don't see the list being
> applied on the interface when i see "sh run"

If you don't specifically ask the router to route or bridge IPX, then devices
on the 10.10.2.0/24 network will be unable to communicate with devices on
10.10.1.0/24 via IPX.

You're not seeing the IPX access-list do anything probably because the router
isn't configured to pass traffic anyway!

-- 
Ryan O'Connell - CCIE #8147
<ryan@complicity.co.uk>
http://www.complicity.co.uk

Next message: PJ: "[nsp] Advertising LSP into IGP?"
Previous message: Gert Doering: "Re: [nsp] CDP query"
In reply to: Mehta, Phoram: "[nsp] blocking ipx traffic across the network!"
Next in thread: Arturo Lev Servin Niembro: "Re: [nsp] blocking ipx traffic across the network!"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:41 EDT