But IP input is only taking 10% of the CPU, so you need to see what is
taking the rest.
What does "sh align" say?
Also have a look at this url:
http://www.cisco.com/warp/public/63/highcpu.html
Rich
Vladimir Litovka wrote:
>
> On Wed, 24 Apr 2002, Richard Gallagher wrote:
>
> > BVI now has CEF support since 12.2(4) and 12.2(4)T
>
> So why CPU load is quite high when using IRB? And it's mainly IP Input:
>
> CPU utilization for five seconds: 93%/79%; one minute: 92%; five minutes: 93%
> PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
> [ ... ]
> 43 787112 489720 1607 10.05% 10.26% 9.57% 0 IP Input
>
> --
> :r !ripewhois DOKA1-RIPE
> -------------------------------------------------------------------------
> Never try to teach a pig to sing. It wastes your time and annoys the pig.
> -- Lazarus Long, "Time Enough for Love"
--#------------------------------------------------------------------# # _.|._.|._ | Richard Gallagher | Direct: +32 2 704 5421 # # Cisco Systems | CCIE #7211 | Email: rgallagh@cisco.com # #------------------------------------------------------------------#
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:42 EDT