if you connected to a router via the console and were logged in you would
have an exec...so by default the exec-timeout is ten minutes, so if you sit
idle at a router prompt for ten minutes the console will dump you.
if you make a reverse connection, say from the aux port to an attached modem
and sat idle the session-timeout would apply. there is no default session
timeout, well it is zero which means it will never timeout.
i dont think there is a timeout command by itself, maybe you mean "timeout
absolute x", if you configure this after x minutes you will get dropped no
matter if you were idle or not.
http://www.cisco.com/warp/public/793/access_dial/comm_server.html
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/dial_
r/drprt1/drtermop.htm
or even better:
http://www.cisco.com/public/pubsearch.html :)
josh
----- Original Message -----
From: "pankaj" <pankaj@worldgatein.net>
To: <cisco-nsp@puck.nether.net>
Sent: Wednesday, April 24, 2002 6:35 AM
Subject: [nsp] exec-timeouts, session-timeout, timeout
> Hi friends,
>
> What is the difference between this three timeouts.
>
> exec-timeouts
> session-timeouts,
> timeout
>
> ---pankaj
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:42 EDT