it's a feature set issue. :(
i can't remember what feature set you need to use to get .1q support
on 12.1 for the 7200. but Feature Navigator (FN) on CCO should
be able to help you with this.
cheers
.siva
On Wed, 24 Apr 2002, Ryan Spott wrote:
> Here is what I have:
>
> sho diag
> Slot 0:
> Fast-ethernet on C7200 I/O card with MII or RJ45 Port adapter, 1 port
>
> sho ver
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-P-M), Version 12.1(2), RELEASE SOFTWARE (fc1)
>
> Here is what I want:
>
> Router(config-if)#int fa 0/0.46
> Router(config-subif)#encapsulation dot1Q 46
> ^
> % Invalid input detected at '^' marker.
> Router(config-subif)#
>
> In the end I just want to run 2 subinterfaces off of this one so I
> can do some "routing on a stick." :)
>
> Am I just setting this up incorrectly or what?
> I am assuming I cannot configure VLANs on the built-in FE port on the
> management blade of a Cisco 7206. Is this true or am I missing
> something?
>
> thanks in advance!
>
>
> ryan
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:42 EDT