We have a E3 link between a GSR with 6E3-SMB line card and a 7206VXR with
PA-2E3 port adapter. Both serial interfaces are g.751 framing and HDLC
encapsulation.
E1 line is a PDH circuit through and SDH network but the last mile is a
microwave E3.
Routers never go to up, interfaces are flapping. I´ve tried both clock
source line, clock source line and clock source internal, both clock source
internal but any success.
I´ve been working with the telco and bert test is ok. Logical loopback in
routers is ok.
Any with similar problems ?
Regards,
Rene Bovio.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:43 EDT