[nsp] QOS policy shaping

From: Roy Reyes (rreyes@commverge.com)
Date: Tue May 07 2002 - 23:30:23 EDT

Next message: francisv@dagupan.com: "[nsp] Enforcing SLAs"
Previous message: Sackman, Ron: "[nsp] FDDI packet discards"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Guys,

Im doing some QOS Policy shaping in the Catalyst 6500 Switch to configure the traffic management of our clients on our Catalyst 6509 with MSFC2/PFC.

Our objective is to set a committed-rate of bandwidth with an option to burst as needed.

Currently, clients are VLANed and connected via FastEthernet having a bandwidth of 100Mbps. We implement trunking as well. Our Objective is to limit its traffic as follows:

1 Limit to 64 Kbps only

2. Limit to 64Kbps with an option to burst at 128 when 80% of the bandwith is used up already

To sum it all, it should work like that of a frame relay.

I also noticed that in able to sustain a 64K of bandwidth you would need to configure 16K of burst rate. Is the sustainable rate of 64K at Catalyst 6500 is the same with the Frame-relay traffic shaping of 64K with no burst? How will I configure the FR 64K with no burst in Catalyst 6500?

rgds,

rreyes

Next message: francisv@dagupan.com: "[nsp] Enforcing SLAs"
Previous message: Sackman, Ron: "[nsp] FDDI packet discards"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:44 EDT