Priority queue

From: Felix Lee (felixlee_hk@hotmail.com)
Date: Wed May 22 2002 - 10:11:14 EDT

Next message: Cheung, Rick: "RE: Priority queue"
Previous message: Laub, Martin - (Arg): "[nsp] [nsp] PA-A3-OC3"
Next in thread: Cheung, Rick: "RE: Priority queue"
Maybe reply: Cheung, Rick: "RE: Priority queue"
Maybe reply: Cheung, Rick: "RE: Priority queue"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Dear all,

I have a Catalyst 6509 running with Fw 5.4(2) & NmpSW 5.5(11). And the
MSFC is running on 12.1(3a)E4.

One strange point that cannot be explained is the priority queue applied on
a VLAN which is connection to a WAN 100Mbps fastethernet.
The priority queue is to put the FTP traffic low priority. After applying
the priority queue, the time for a daily FTP job has been extended from 3
hours to 5 hours while the traffic loading of the link is only around 10%.
The duration come back to 3 hours after removing the priority queue.

Can someone help to give advice?

Thanks
Felix

_________________________________________________________________
Join the world’s largest e-mail service with MSN Hotmail.
http://www.hotmail.com

Next message: Cheung, Rick: "RE: Priority queue"
Previous message: Laub, Martin - (Arg): "[nsp] [nsp] PA-A3-OC3"
Next in thread: Cheung, Rick: "RE: Priority queue"
Maybe reply: Cheung, Rick: "RE: Priority queue"
Maybe reply: Cheung, Rick: "RE: Priority queue"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:44 EDT