RE: [nsp] ATM interfaces...

From: Prads (drix@pilnet.com)
Date: Sat May 25 2002 - 02:28:23 EDT

Next message: Mark Pace Balzan: "RE: [nsp] ATM interfaces..."
Previous message: Michael Damkot: "Re: [nsp] ATM interfaces..."
In reply to: Michael Damkot: "Re: [nsp] ATM interfaces..."
Next in thread: Prads: "[nsp] ATM interfaces..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hi,

How should the interfaces be configured then? Should one be configured
user and the other network? Can you guide me ho to do it? Also, should
the tx/rx pairs be swapped on the other interface?

Thanks in advance from a greenie.

Prads

-----Original Message-----
From: Michael Damkot [mailto:mdamkot@UU.NET]
Sent: Saturday, May 25, 2002 1:09 PM
To: Prads
Cc: cisco-nsp@puck.nether.net
Subject: Re: [nsp] ATM interfaces...

yes

-- 
Cheers,
Michael Damkot CCNP
Technical Trainer
Network Engineer
On Sat, 25 May 2002, Prads wrote:
> Date: Sat, 25 May 2002 10:32:54 +0800
> From: Prads <drix@pilnet.com>
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] ATM interfaces...
> Resent-Date: Fri, 24 May 2002 22:36:03 -0400
> Resent-From: cisco-nsp@puck.nether.net
> 
> Hi,
>  
> Is it possible to connect atm interfaces back-to-back without an atm
> switch in between?
>  
> Thanks!
>  
> Prads
>

Next message: Mark Pace Balzan: "RE: [nsp] ATM interfaces..."
Previous message: Michael Damkot: "Re: [nsp] ATM interfaces..."
In reply to: Michael Damkot: "Re: [nsp] ATM interfaces..."
Next in thread: Prads: "[nsp] ATM interfaces..."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:45 EDT