Re: [nsp] Diffrences between buildin and NM 10/100 Ethernet modules

From: Stefan Reelsen (stefan@reelsen.net)
Date: Sun May 26 2002 - 08:19:40 EDT

Next message: Chris Johns: "[nsp] advice on upgrading IOS on Cat6K with Native IOS"
Previous message: TMS: "[nsp] Diffrences between buildin and NM 10/100 Ethernet modules"
In reply to: TMS: "[nsp] Diffrences between buildin and NM 10/100 Ethernet modules"
Next in thread: Ryan O'Connell: "Re: [nsp] Diffrences between buildin and NM 10/100 Ethernet modules"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

Hello TMS,

Sunday, May 26, 2002, 2:04:39 PM, you wrote:

T> Hello

T> Did 10/100 Ethernet interfaces build in above Cisco routers have
T> any diffrences between NM 10/100 Ethernet interfaces (ex.NM-1FE2W) ?
T> I talking with friend, and He said that build in Ethernet intefaces
T> didn't support VLAN encapsulations like dot1q/ISL. My question
T> is regarding interfaces in:

T> 1720
T> 2620
T> 3661
T> 7200VXR I/O Controller with 1 FastEthernet

The 1720 definitely doesnŽt support VLAN tagging, but I believe this
was concerning embedded interfaces in general...?

-- 
Best regards,
 Stefan                            mailto:stefan@reelsen.net

Next message: Chris Johns: "[nsp] advice on upgrading IOS on Cat6K with Native IOS"
Previous message: TMS: "[nsp] Diffrences between buildin and NM 10/100 Ethernet modules"
In reply to: TMS: "[nsp] Diffrences between buildin and NM 10/100 Ethernet modules"
Next in thread: Ryan O'Connell: "Re: [nsp] Diffrences between buildin and NM 10/100 Ethernet modules"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:45 EDT