> On Tue, Nov 30, 1999 at 02:17:40PM -0800, Glen Shok wrote:
> > if they are directly connected, you need a dte and a dce side
> cable. (i think)
> > also need to configure the "clockrate" command ON ONE SIDE ONLY.
>
> make sure that the side you configure clockrate on is DCE, if you care
> anything for specifications.
The router will prevent both of these problems. It will only allow you to
configure clock rate on the DCE side.
Wade
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:08 EDT