On Mon, 3 Jun 2002, fingers wrote:
> Hi
>
> > I'm building IPsec VPN using PIX 515 as hub a 1751 a spokes. I want to
> > centralize all Internet access on PIX. I have 3 interfaces on the PIX -
> > private network of HQ, DMZ and external. I thought I would configure the
> > tunnels on PIX, the decrypted traffic would than be routed - when destined
> > for Internet PAT translated. It seems it may not be possible to configure
> > according to "Cisco Secure PIX Firewall FAQ" and question 'Can I operate
> > the PIX in a "one armed" configuration?'.
> >
> > The error I get is "106011: Deny inbound (No xlate)
> > icmp src outside:10.1.0.2 dst outside:aa.bb.cc.dd (type 8, code 0)".
>
> do you have a 'nat' statement for that block?
>
> 'show [nat/xlate]'?
The problem is something else - PIX won't pass traffic back into the
interface where it came from.
-- Michal Mertl Specialist IP Service Development KPNQwest Czechia s.r.o. GTS Czech a.s. Vinohradska 184 130 52 Praha 3 Tel.: +420 2 96157111 Fax: +420 2 96157444 e-mail: Michal.Mertl@kpnqwest.cz ____________________________________________ Počínaje datem 1.5. 2002 došlo k provoznímu sloučení společností KPNQwest a GTS
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:46 EDT