RE: [nsp] OID for bytes in/out an interface

From: Ahmer Ghazi (ghazi@sys.net.pk)
Date: Thu Jun 20 2002 - 02:36:22 EDT

Next message: Ysmael B. Tan: "[nsp] Maximum-prefix in BGP"
Previous message: Cisco Systems Product Security Incident Response Team: "[nsp] Cisco Security Advisory: Cisco ONS15454 IP TOS Bit Vulnerability"
Maybe in reply to: Tito Basa: "[nsp] OID for bytes in/out an interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

ftp://ftp.cisco.com/pub/mibs/oid/IF-MIB.oid

"ifInOctets" "1.3.6.1.2.1.2.2.1.10"
"ifOutOctets" "1.3.6.1.2.1.2.2.1.16"

Ahmer Ghazi

-----Original Message-----
From: Tito Basa [mailto:titobi@yahoo.com]
Sent: Wednesday, June 19, 2002 4:22 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] OID for bytes in/out an interface

hi folks!

is there an OID for a router or switch
to tell me the number of bytes in and out
an interface?

much like a summarized "sh ip accounting"
command. Collecting Netflow data requires
some data storage and scripting.

all i know is the current input/output rate of an
interface used commonly by MRTG.

Don't know which one, if there's one, from the site:

ftp://ftp.cisco.com/pub/mibs/oid/

any related OID for my requirement would be
appreciated

thanks in advance.

tito

__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com

Next message: Ysmael B. Tan: "[nsp] Maximum-prefix in BGP"
Previous message: Cisco Systems Product Security Incident Response Team: "[nsp] Cisco Security Advisory: Cisco ONS15454 IP TOS Bit Vulnerability"
Maybe in reply to: Tito Basa: "[nsp] OID for bytes in/out an interface"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:47 EDT