Dear all,
I have this network setup:
Router A <-eth0-------eth0-> Router B
and simplified config:
--------------------
! Router A
interface loopback0
ip address 192.168.0.1 255.255.255.255
!
interface ethernet0
ip address 10.0.0.1 255.255.255.0
!
router bgp 65501
neighbor 192.168.0.2 remote-as 65502
neighbor 192.168.0.2 update-source loopback0
neighbor 192.168.0.2 ebgp-multihop 2
!
ip route 0.0.0.0 0.0.0.0 10.0.0.2
--------------------
! Router B
interface loopback0
ip address 192.168.0.2 255.255.255.255
!
interface ethernet0
ip address 10.0.0.2 255.255.255.0
!
router bgp 65502
neighbor 192.168.0.1 remote-as 65501
neighbor 192.168.0.1 update-source loopback0
neighbor 192.168.0.1 ebgp-multihop 2
!
ip route 0.0.0.0 0.0.0.0 10.0.0.1
--------------------
BGP between 2 routers cannot be established. However, when I add a
route of another router's loopback in either one router, it will be up.
E.g.
! Router A
ip route 192.168.0.2 255.255.255.255 10.0.0.2
Is it normal? (in the sense that I only need to add this route in 1
router, not both.)
Thanks.
Regards,
Chris
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:48 EDT