Hi!
I'm playing with a PA-A3-T3 on our new ATM
link and vbr-nrt SIR15M/PIR30M
when I monitored my traffic on MRTG I can only see
traffic being clipped at 12.8Mbps. Is there a simple
explanation for this (overhead?)as 48 bytes/53 bytes
is not equal to 12.8/15 or did I miss something?
below is my test config:
interface ATM3/0
no ip address
no ip directed-broadcast
no ip route-cache cef
atm scrambling cell-payload
no atm ilmi-keepalive
no atm enable-ilmi-trap
!
interface ATM3/0.1 point-to-point
description
ip address x.x.x.x 255.255.255.252
no ip directed-broadcast
no atm enable-ilmi-trap
pvc 1/32
vbr-nrt 30000 15000 100
is there anything I can do to get the 15 Mbps. I
understand that PIR is quite diffrent from the
usual definition of burst as described in the link
below:
http://www.cisco.com/warp/public/121/atm_vbrshape.shtml
thanks in advance!
tito
__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:49 EDT