just like any interface, just add the "secondary" keyword on your ip address
statement
int fas0/0
ip address 1.1.1.1 255.255.0.0
!... other int commands
! standby 1 { options }
standby 1 ip 1.1.1.2
standby 1 ip 1.1.2.2 secondary
!... etc...
----- Original Message -----
From: "Hagop Karaoghlanian" <hkaraoghlanian@corp.attcanada.ca>
To: <cisco-nsp@puck.nether.net>
Sent: Monday, July 08, 2002 7:43 AM
Subject: [nsp] is it possible to have multiple HSRP Standby IP's????
> Hi All,
>
> Is it possible to have multiple standby IP's with two routers in one
group?
>
> I have three different subnets in my LAN, a /29 and two /27's. I have a
> 2611 with dual T1, and another 2611 with a single T1. I need both of them
> passing traffic at the same time, I cannot have one of them dormant. But
at
> the same time, they would both have to back each other up. Why both of
them
> passing traffic? becuase dual T1 router has the 2 /27's on it, which is
> mostly internet traffic. The other router has the /29 on it used for
> VPN-ing and mail services.
>
> I really need some suggestions. thanks for your help.
>
> Hagop
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:49 EDT