Re: [nsp] 2912XL disco style

From: Thomas Kernen (tkernen@deckpoint.ch)
Date: Sat Jul 13 2002 - 11:31:30 EDT


I checked the POST codes info on CCO, and nowhere is a red led ever
mentioned. Anyway.. it's unreliable, console sometimes works, will boot (was
even able to upgrade IOS to latest release this switch), will run a few
minutes and then reboot (no errors given on the console), go into "disco
mode". Might reboot later on (timing between reboots doesn't appear to be
consistent).

So RMA it shall be.

T

> Hi,
>
> On Fri, Jul 12, 2002 at 05:22:35PM -0400, Thomas Kernen wrote:
> > Futher to my last post... forgot to add that no devices are connected on
any
> > of the ethernet ports.
>
> I'd check for console output while booting. But I'm afraid (without
> knowing for sure) that the switch just died and the signalling is
> something that only TAC will know how to decode.
>
> gert
> --
> USENET is *not* the non-clickable part of WWW!
>
//www.muc.de/~gert/
> Gert Doering - Munich, Germany
gert@greenie.muc.de
> fax: +49-89-35655025
gert.doering@physik.tu-muenchen.de
>



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:49 EDT