On Sun, Jan 23, 2000 at 01:02:58PM -0500, Michael Beckmann wrote:
> Hi,
>
> I want to route between VLANs on a Cat4003 switch. The switch
> only supports 802.1q. The router is a 7513 with PA-GE (I could
> get a GEIP if that helped).
>
> The Gigabit Ethernet interfaces for the 7513 are supposed to
> support 802.1q, but I cannot find a way of configuring it. I
> am using 12.0(7)T, and there is no "encapsulation" command for
> the GigabitEthernet interface.
>
> Has anybody done this before ? I would appreciate your comments.
>
> I even found a bug ID (CSCdm75730) for this in the 12.0(7)T
> caveats, so it must be possible :-)
Havn't tried it, but just checking the basics, you are running the
enterprise (plus ?) image, right ?
/Jesper
-- Jesper Skriver, jesper(at)skriver(dot)dk - CCIE# 5456 Work: Network manager @ AS3292 (Tele Danmark DataNetworks) Private: Geek @ AS2109 (A much smaller network ;-)One Unix to rule them all, One Resolver to find them, One IP to bring them all and in the zone to bind them.
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT