Michael,
I am assuming you created a subinterfac and attempted the encapsulation
command?
!
interface GigabitEthernet 9/0/0.100
encapsulation dot1q 100
<bleh, bleh>
!
chris
-----Original Message-----
From: Michael Beckmann [mailto:petzi@apfel.de]
Sent: Sunday, January 23, 2000 4:12 PM
To: cisco-nsp@puck.nether.net
Subject: [nsp] Routing between VLANs using 802.1q
Hi,
I want to route between VLANs on a Cat4003 switch. The switch
only supports 802.1q. The router is a 7513 with PA-GE (I could
get a GEIP if that helped).
The Gigabit Ethernet interfaces for the 7513 are supposed to
support 802.1q, but I cannot find a way of configuring it. I
am using 12.0(7)T, and there is no "encapsulation" command for
the GigabitEthernet interface.
Has anybody done this before ? I would appreciate your comments.
I even found a bug ID (CSCdm75730) for this in the 12.0(7)T
caveats, so it must be possible :-)
Michael
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT