Thanks Mike, Lincoln and Michael for helping me out.
I'm running 12.0(7)T image for service providers as a test.
System image file is "slot0:c7200-p-mz_120-7.bin"
I've tried other variants as well, we're licensed for Layer 3 switching,
that version didn't seem to work either. (The marker might
not display in your email properly, its positioned at the start of
the 'version' keyword and the 'web-cache' keyword).
Here's what I get....... Doesn't this indicate I can't do version 2?
gnv-rtr0#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line. End with CNTL/Z.
gnv-rtr0(config)#ip wccp version 2
^
% Invalid input detected at '^' marker.
gnv-rtr0(config)#ip wccp web-cache
^
% Invalid input detected at '^' marker.
gnv-rtr0(config)#
----- Original Message -----
From: "Lincoln Dale" <ltd@cisco.com>
To: "Kent Tambling" <Kent@acceleration.net>; <cisco-nsp@qual.net>
Sent: Monday, January 24, 2000 9:19 PM
Subject: Re: [nsp] WCCP 2 IOS compatibility
Hi Kent,
At 20:41 23/01/00 -0500, Kent Tambling wrote:
>Anybody know where I can find out which versions of 12.0 support
>WCCP version 2.0 without booting each one? For the 7200 I tried
>12.0(7)T multiple variants and they only do WCCP 1.0. I think I
>need to back down to 12.0(5)T but was hoping someone here might
>already know.
IOS 12.0(7)T (for 72xx) most certainly does have WCCPv2.
it also has WCCPv1 (which is explicitly enabled via "ip wccp version 1";
WCCPv2 is the default otherwise).
12.0T since 12.0(5)T has had WCCPv2.
12.0 mainline only has (and will only ever have) WCCPv1.
12.0S currently only has WCCPv1. WCCPv2 images for 12.0S are currently in
EFT (along with some other neat WCCP enhancements).
cheers,
lincoln.
--
Lincoln Dale Content Switching
ltd@cisco.com Cisco Systems Inc. | |
|| ||
+1 (408) 525-1274 bldg G, 170 West Tasman |||| ||||
+61 (3) 9659-4294 San Jose CA 95134 ..:||||||:..:||||||:..
+1 (713) 784-3003 <<
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT