looks like it will only support one version
You can check version by
# show ip wccp web-cache detail
I bet, everything in T train starting with 12.0(3)T will support version 2.
Mike
----- Original Message -----
From: "Kent Tambling" <Kent@acceleration.net>
To: <cisco-nsp@qual.net>
Sent: Tuesday, January 25, 2000 7:35 PM
Subject: Re: [nsp] WCCP 2 IOS compatibility (am I crazy?)
> Yup.
>
> gnv-rtr0(config)#ip wccp ?
> enable Enable Web-Cache Coordination Protocol
> group-list Set the access-list used to permit group membership
> redirect-list Set the access-list used to permit redirection
> <cr>
>
>
> ----- Original Message -----
> From: "Mike Axelrod" <maxelrod@digisle.net>
> To: "Kent Tambling" <Kent@acceleration.net>
> Sent: Tuesday, January 25, 2000 10:05 PM
> Subject: Re: [nsp] WCCP 2 IOS compatibility
>
>
> hello Kent,
> Did you try # ip wccp ?
> Maybe you need to enable wccp first.
> I am running v.1 under 12.0(6) mainline.
>
> Mike
> ----- Original Message -----
> From: "Kent Tambling" <Kent@acceleration.net>
> To: <cisco-nsp@qual.net>
> Sent: Tuesday, January 25, 2000 6:05 PM
> Subject: Re: [nsp] WCCP 2 IOS compatibility
>
>
> > Thanks Mike, Lincoln and Michael for helping me out.
> >
> > I'm running 12.0(7)T image for service providers as a test.
> > System image file is "slot0:c7200-p-mz_120-7.bin"
> >
> > I've tried other variants as well, we're licensed for Layer 3 switching,
> > that version didn't seem to work either. (The marker might
> > not display in your email properly, its positioned at the start of
> > the 'version' keyword and the 'web-cache' keyword).
> >
> >
> > Here's what I get....... Doesn't this indicate I can't do version 2?
> >
> > gnv-rtr0#conf
> > Configuring from terminal, memory, or network [terminal]?
> > Enter configuration commands, one per line. End with CNTL/Z.
> > gnv-rtr0(config)#ip wccp version 2
> > ^
> > % Invalid input detected at '^' marker.
> >
> > gnv-rtr0(config)#ip wccp web-cache
> > ^
> > % Invalid input detected at '^' marker.
> >
> > gnv-rtr0(config)#
> >
> >
> > ----- Original Message -----
> > From: "Lincoln Dale" <ltd@cisco.com>
> > To: "Kent Tambling" <Kent@acceleration.net>; <cisco-nsp@qual.net>
> > Sent: Monday, January 24, 2000 9:19 PM
> > Subject: Re: [nsp] WCCP 2 IOS compatibility
> >
> >
> > Hi Kent,
> >
> > At 20:41 23/01/00 -0500, Kent Tambling wrote:
> > >Anybody know where I can find out which versions of 12.0 support
> > >WCCP version 2.0 without booting each one? For the 7200 I tried
> > >12.0(7)T multiple variants and they only do WCCP 1.0. I think I
> > >need to back down to 12.0(5)T but was hoping someone here might
> > >already know.
> >
> > IOS 12.0(7)T (for 72xx) most certainly does have WCCPv2.
> > it also has WCCPv1 (which is explicitly enabled via "ip wccp version 1";
> > WCCPv2 is the default otherwise).
> >
> > 12.0T since 12.0(5)T has had WCCPv2.
> > 12.0 mainline only has (and will only ever have) WCCPv1.
> > 12.0S currently only has WCCPv1. WCCPv2 images for 12.0S are currently
in
> > EFT (along with some other neat WCCP enhancements).
> >
> >
> > cheers,
> >
> > lincoln.
> >
> > --
> > Lincoln Dale Content Switching
> > ltd@cisco.com Cisco Systems Inc. | |
> > || ||
> > +1 (408) 525-1274 bldg G, 170 West Tasman |||| ||||
> > +61 (3) 9659-4294 San Jose CA 95134 ..:||||||:..:||||||:..
> > +1 (713) 784-3003 <<
> >
> >
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:12:09 EDT